Bubblesorba

BUBBLESORBA™ designer acoustic panels are in the form of unique shapes with unsurpassed choices in forms and colours, so that they can be suited to many different interiors.

Whilst their primary purpose is to reduce reverberant noise inside rooms, they also add special design flair which gives the "wow" factor to visitors and occupants of offices, restaurants, hotels, reception areas and showrooms.

Bubblesorba Panels

Bubblesorba

Designer Acoustic Panels

  • Product Description
  • Acoustic
  • Installation
  • Technical

 

Bubblesorba designer acoustic panels are used to absorb noise in reverberant spaces such as restaurants, offices, showrooms, studios, homes, etc.

These acoustic panels have unique shapes with unsurpassed choices in shapes and colours, so that they can be visually pleasing and unique. These panels can visually lift up the customers profile and tailor a noise solution for their room.

Our products are durable, They last a long time and are manufactured with materials that enables them to always keep the same shape.

Bubblesorba designer acoustic panels are an artistic decoration as well as being acoustic. The basic shapes lead to millions of combination of patterns and colours. Do you love soft shapes or the strictly graphical? We have them. The products contribute to creating unique and creative spaces so that people can be comfortable both aurally and visually.

Bubblesorba designer acoustic panels can be used over and over again. They can be moved and make new combinations for generations.

Acoustic Performance


Sound absorption is classified in A-E, and since the classification is made on the whole spectrum of frequencies, the total classification is B.

The products have the highest possible measured sound absorption coefficient at the middle- and high frequencies, i.e. between 500-4000Hz.

Acoustic graph

  Frequency (Hz)
125
250
500
1000
2000
4000
  Sound Absorption
Co-efficient
0.15
0.50
0.95
1.00
1.00
1.00

 

 

The principle is that you press the panel to the wall, and it is fixed, without drilling and screws.

On the back is a textile with Velcro that has a strong adhesive on it. The velcro pieces are in place at the delivery of the products, but it is good to check that the placement is as close as possible to the edge, without being seen when mounted.

On a painted surface that is dry, without greasy spots, these will be enough. If the wall is uneven (concrete, limed or have a large downdraught affecting the glue) it may be necessary to use extra measures. If the products are to be placed in an environment where it could be exposed to damage like for example a school it is necessary with extra durable mounting. Please contact us for advice.

We will send a drawing of the combination with mounting measures. The shapes of BubblesorbaTM are made to sit with a certain distance, approximately 6-7cm, from each other.

 

Lay it out on the floor according to the drawing, as exact as possible. Panels should be installed on a flat & level wall.

Put little marks on the wall of the measures width and height and a horizontal line, to be wiped away when finished. Then take each piece, hold it against the wall and make little marks around it, remove the protection sheet and press the panels lightly to the wall. Then take a step back to check. It can be adjusted a little if you like. When you are satisfied with the placement, press and press firmly on all the panels, to be sure the adhesive adheres to the wall.

Note: The glue can tear pieces of paint and wallpaper when removed. We do not take responsibility if that happens.

Fire Resistance

Non ignition to BS EN 1021-1:2006

Colour

Bubblesorba sound absorbent panels are available in 10 standard colours. (More colours available on request).

 

Pattern

We have a range of standard pattern groups for you to choose from. Feel free to compose your own group of patterns and shapes to fit your interior at your workspace or home.